to seal pre-cut film blanks on ring book covers, letter files, etc. over the whole cover height or only on parts.
To manufacture windows with pre-printed paper inserts or pockets on ring book covers, letter files, etc.
window on ring binder covers
window with paper inserts
window with comercial paper
Mechanical output:
At a film thickness of 0,1 mm up to 60 cycles/min Depending on product measurements, design, film material and material thickness.
Ring book cover or letter files:
height: 220 - 380 mm ( 8 _ in - 15 in)
width: 400 - 750 mm (15 _ in - 29 _ in)
Film for windows or pockets:
roll outside ¯: max. 400 mm (15 _ inch)
core Ø :76 mm ( 3 in)
film blanks:
height: 50 - 320 mm (2 in - 12_ in) material width
width: 100 - 320 mm (4 in - 12 _ in) feed direction
Paper inlay:
width 8 mm, height 5 mm smaller than film blanks
Usable materials:
Film:
PP, PE and PVC films in commercial quality from approx. 0,060 mm up to max. 0,12 mm, thickness measured
Paper inserts:
commercial paper qualities up from approx. 80 g/m_ to max. 200 g/m_
Letter file- or ring book covers:
commercial qualities from approx. 0,3 mm up to approx. 3 mm
Use of paper and film material depends on an applicability test in our factory.
